Showing posts with label Fabric. Show all posts
Showing posts with label Fabric. Show all posts

Tuesday, July 12, 2011

How to Reupholster a Chair

Do you have a couple of tacky dining room chairs that look like they came from the 70's?  Or are you a college kid who gets all the hand-me-downs and you just want something cute for your dorm?  Or maybe you just want to redecorate and that chair in the corner doesn't match?  Well why not reupholster it!!  It's actually REALLY easy and doesn't take long at all.  You just need to make sure you have all the right tools!


What you need:
1.  A chair
2.  Choice of fabric (about a yard or so)
3.  Staple gun and staples
4.  Screw driver (either flat or 4 pronged depending on which type of nails are in your chair)
5.  Scissors
6.  Toothpicks (if needed)*

Here's how you do it:
1.  Unscrew the piece to be upholstered from the chair frame and lay it on your fabric with the fabric facing the way you want it on the chair.
2.  Cut the fabric so that about 4 inches stick out from the sides around the chair bottom like this:
3.  Fold the top edge over and staple to the chair bottom.  Pull the opposite side over, pull tight and staple. I like to staple about 3 staples on each side.  Keep doing this until the sides are stapled tight.
4.  Now leaves the corners: pull the fabric back, tuck the sides in and fold over and place a staple on each side of the fold.  If this is too complicated or hard to follow, just try and fold the corners over in any way you can, secure them with staples and make sure no fabric sticks out!
5.  Now that your seat is all covered, let's reattach it!  You'll just need to hold it back on where you found it and twist the screws back in.  
*6.  If your holes are stripped like mine were because my chair had been reupholstered 4 times, then you'll have to use my toothpick trick.  Break a toothpick into 3 parts (1 toothpick per hole) and stick the 3 parts down into the screw hole.  This should give enough wood for your screw to hold on to!


You're done!! How easy was that.  Now time for a before and after photo:

BEFORE

AFTER



Sunday, July 3, 2011

Fun Flag Border


Have wedding planning to do that you want to make unique?  Are you getting a surprise birthday party ready that you want to make super special?  Or are you just decorating a room that needs that original touch?  I have a fast and easy way for you to do it.  How about you make a flag border!

Here's what you need:
1.  3 fabrics of your choice (I picked a color theme of white, black and turquoise)
2.  String or ribbon that needs to be pretty long (I choose a thin twine)
3.  Hot glue and glue gun
4.  Paper/cardboard/cardstock (for making a triangle pattern)
5.  GOOD scissors 

Here's how you do it:
1.  Make a triangle pattern on your sturdy paper.  It can be complicated if free handing so I used a straight edge and several tries to get the one I wanted.  You can make it whatever size you want but I did mine about the size of my hand if I was making a jazz hand.
2.  Cut out about 15 triangles of each fabric (You can cut out less if you want a smaller banner)
3.  Now here's the sticky part.  Hot glue!  Glue a line across the top of the first flag, place the string over the glue and fold the top edge over it, essentially making a small fold over the string to hold the flag in place!
4.  About 2 inches from the first flag, glue the second flag just like you did in step 3.
5.  Continue steps 3 and 4 until all the flags are glued on to the string in alternating fashion (you can either do them randomly or in a pattern)

Now your flag banner is done!  Here are some more cute ways to fashion them.  You can even put letters on them and use it as a cute engagement photo accessory! Go here here and here for some more cute examples!